Multiple servers performance

Hi all,

I would like to know if somebody did some tests about performance with multiple servers. The goal is to see if we get a "linear gain" : 2 servers allow to process double jobs without submission delay ? Do you know if it exists some graphs about the use of multiple servers (as we can see for autosys with multiple EP).

Regards,
Eric.

Lire l'article

workloadautomation.org Latest 5 Posts

workloadautomation.org 5 latest posts feed

Voir toute l'actualité

3 juillet 2009 : BMC Control-M Official IN and OUT Conditions Matching up for Different Calendars

I have jobA coming into the que at 07:00 and running at 00:01 the next day. JobB then comes into the que at 07:00 and wait on jobA 's completion. How do i get the IN and OUT Conditions to match so jobB knows the jobA completed. Both jobs run only once a month on offerent calendars. I tried ODAT (...)

1er juillet 2009 : Control-X MicroSoftÂ's Job Processor and CONTROL-M

Hi, Has anyone used CONTROL-M to interface with MicroSoft's Job Processor file mover for File Transfers? Your experiences will be appreciated Thanks! Steve View the full article

28 juin 2009 : Control-X Re: Move a lot of classic jobs in a scheduling group.

Thx a lot for these explanations.I have still some table to modify. I will try this also. 2009/6/28 rahulsehgal305 ... Thx a lot View the full article

28 juin 2009 : Control-X Re: Move a lot of classic jobs in a scheduling group.

Hi, For future purpose, there is one easy method for copy jobs in a Scheduling table to a Group scheduling table:- You can copy the jobs in a Scheduling table View the full article

26 juin 2009 : BMC Control-M Official Transferring accounts (cm4ftp->cm4aft)

Hi, Is there a way to easily transfer accounts made with "CM for FTP" module to this new "CM for AFT"? Modules are on different servers. /m View the full article

26 juin 2009 : BMC Control-M Official problem executing commands with java api unknown request

Hi, I'm currently trying to execute command with the control M/EM java API. I'm using: EMXMLInvoker invoker = new EMXMLInvoker(gasComponent); The only message that's working is the user registration, I receive a token. Once I try an other command, check token, rerun jobtracking, ... (...)

26 juin 2009 : Control-X Re: MVS Question

Tim, Try coding >C0000 instead of NC0000. From the manual: If only code NCXXXX is specified: The accompanying DO statements are never performed. The specified View the full article

26 juin 2009 : Control-X MVS Question

Hello, We are trying to get the following to occur and it's not stopping our cyclical process, is there anything that we have to validate on the CONTROL-M View the full article

26 juin 2009 : Control-X Re: Anyone running Control-M jobs on COGNOS?

You can use commandline to start the processing, but without SDK you can't get any acknowledgement back from the application to the OS to verify that the View the full article

25 juin 2009 : Control-X Shout emails in CTM UNIX

I have discovered some interesting and useful information about Shout emails in Control-M that is not yet documents by BMC.I have been using a UNIX Control-M View the full article

25 juin 2009 : Control-X Re: Reg:Problem with alert

What version? From your question I would gather 6.1.X. Starting in 6.2 mainframe you have the ability to add +X days to the shout message. If you're on 6.2 View the full article

25 juin 2009 : Control-X Re: Reg:Problem with alert

It is for Control-M on Z/OS only View the full article

25 juin 2009 : Control-X Re: Move a lot of classic jobs in a scheduling group.

Anyway, I tryed that method and it's working quite fine.Thx a lot. 2009/6/23 Pat Hicok ... Anyway, I tryed that method and it's working View the full article

25 juin 2009 : Control-X John N DEWSNAP/HBEU/HSBC is on holiday

I will be out of the office starting 25/06/2009 and will not return until 26/06/2009. Alternative contact is Simon Kusners 790 31704 or Rick Fawley 790 29986 View the full article

25 juin 2009 : Control-X critical path schedule

I would like to know if you have written something about critical path schedule, for each day run. View the full article

24 juin 2009 : Control-X Re: "newday" file in Windows agent TEMP dir - 6.3.01

Nope, they are dated this morning at 7am. Interestingly, they were updated at 1pm when our newday actually hit. Which makes me wonder even more what would be View the full article

24 juin 2009 : Control-X Re: "newday" file in Windows agent TEMP dir - 6.3.01

Matthew, What is the date of the file? Perhaps it's from when the product was first installed (7am is the default ND time) From: Control-X@yahoogroups.com View the full article

24 juin 2009 : Control-X "newday" file in Windows agent TEMP dir - 6.3.01

..Program FilesBMC SoftwareCONTROL-M AgentDefaultTEMP contains an empty "newday" file modified at 7am. I'm wondering what this file is for. Our newday View the full article

24 juin 2009 : Control-X Re: Reg:Problem with alert

Unless you're on 6.3.xx then you can delay the shout for as many hours/days as you want. Thanks, Rob Neal AAIT - University of Phoenix / BMCS-CE - Control-M View the full article

24 juin 2009 : Control-X Re: Reg:Problem with alert

LateSub and LateTime must be less than 24 hours from new day time. You can only send a LateSub shout at 0459 (assuming new day at 5am). If you really want, View the full article

24 juin 2009 : Control-X Re: Reg:Problem with alert

Hello- I would suggest the scheduling of a job which would order up the day following the "triggered" job, in question, that would have a submit time of 7am, View the full article

23 juin 2009 : Control-X Re: Control-M and Lawson

FYI.. If they have a commandline option, they should have a value to indicate to wait until the processing is completed, before going back to the command View the full article

23 juin 2009 : Control-X Control-M and Lawson

Hello, Does anyone use Control-M to run Lawson jobs? Lawson has its own scheduler, but do to interfacing with other enterprise applications, we'll need it to View the full article

23 juin 2009 : Control-X Re: Move a lot of classic jobs in a scheduling group.

Hi, Thx for your answers. 70 jobs in a SG is not much. I already had more than hundreds jobs intercepted on a SAP server in one group. Here, every job have a View the full article

23 juin 2009 : Control-X Re: Move a lot of classic jobs in a scheduling group.

Just my 2 cents on this. It doesn't provide guidance or solution to your need. Having 70 jobs in a scheduling group is probably high. Depending on your View the full article

23 juin 2009 : Control-X Re: Move a lot of classic jobs in a scheduling group.

Hi Boris, From Knowledge Bass SLN000000199903 Step 1: Define an empty Group Scheduling Table with desired Tag definitions using EM/Desktop. Step 2: Create a View the full article

23 juin 2009 : Control-X Re: Running a job three times: please verify solution

Unfortunately it is a 6.3 installation. Anyone has a better solution at hand as I want to avoid multiple jobs for one task espacially for two reasons: - View the full article

23 juin 2009 : Control-X Re: Running a job three times: please verify solution

What version are you running? I assume it's not 6.4 as this is available in that version - the ability to just specify times to run the job even though they View the full article

23 juin 2009 : Control-X Running a job three times: please verify solution

I want to have a job that runs 3 times daily but not at regular intervals which probably doesn't meet the requirement for a cyclic job. I had the following View the full article

22 juin 2009 : Control-X Processing BizTalk Applications.

Folks, Is anyone running Biztalk applications through Control-M ver. 6.03.01? Any informaion on the setup would be great... Thanks, View the full article

22 juin 2009 : Control-X Re: Last Month Variable

Your two cents is valued, Thanks.. Here is what I have created with no scripting within one CONTROL-M batch job; COMMANDLINE JOB PRECMD: scp -v View the full article

22 juin 2009 : Control-X OpenVMS Agents Monitor Blowing Up

We are having problems with our OpenVMS jobs "DISAPPEARING" because the RUNAGMON process blows up. Has anyone ever run into this? It just started out of the View the full article

20 juin 2009 : Control-X Re: Ctm 6.2 EM Client - Server connecting to the wrong client IP

You might be able to get around the Viewpoint not loading by shutting any VPN , loading VP, then restarting the VPN. Regards, Chris Stein Arne Storslett View the full article

19 juin 2009 : Control-X Re: Create a report on the number of jobs that failed over the last

I'm also running 6.2. Could you provide me a copy of your script? Thanks. ________________________________ From: Control-X@yahoogroups.com View the full article

19 juin 2009 : Control-X Re: Create a report on the number of jobs that failed over the last

If anyone out there has Clear Case or Harvest, Source Control software you can do the following. One company I worked for we created 5 jobs that did the View the full article

19 juin 2009 : Control-X Re: Create a report on the number of jobs that failed over the last

Stein, I am 6.3 and am looking for solution to perform the following. Can you share the scripts you have if possible? - Getting a list of all jobs View the full article

19 juin 2009 : Control-X Re: Create a report on the number of jobs that failed over the last

Hi I am on 6.2, so I don't have versioning (as 6.4 has). I do it as part of the backup routines. Each day we export all scheduling tables to files. I just View the full article

19 juin 2009 : Control-X Re: Urgent clarification: Job in unknown state even though the agent

I am this might be of some concern, and I am sure people do have some sort of work around to deal with this which probably is less manual. If this is widely View the full article

19 juin 2009 : Control-X Urgent clarification: Job in unknown state even though the agent is

In 6.3 version, I want to know if anyone also has the need to something built around the following scenario. - Job is executing on Node 1 - Node 1 is shut down View the full article

18 juin 2009 : Job Vision.... Dead or Alive?

Hi all, Im interested to know whether anyone out there still uses Job Vision and if so to what degree? Do you have it for a singular team or roll it out as an available utility for all AutoSys users? Timmy

18 juin 2009 : Control-X Re: Ctm 6.2 EM Client - Server connecting to the wrong client IP

One of my users was running a VMWare server on her machine, and had 3 different IPs. We uninstalled the VMWare server as the reordering didn't help much. Now View the full article

18 juin 2009 : Control-X Re: Ctm 6.2 EM Client - Server connecting to the wrong client IP

I had the same issues when connecting to an EM GUI while on a VPN network. I had to issue this command (at the command prompt) to get the GUI to load. I had View the full article

18 juin 2009 : Control-X Re: Create a report on the number of jobs that failed over the last

Brad, Thanks for the information I'll see if it still truncates the names. Tim Marshall Technical Specialist - IT Production Control Rogers Shared Services View the full article

18 juin 2009 : Control-X Re: Ctm 6.2 EM Client - Server connecting to the wrong client IP

That was helpful. Thank you Stein Arne ... -- Stein Arne Storslett View the full article

18 juin 2009 : Control-X Re: Ctm 6.2 EM Client - Server connecting to the wrong client IP

Stein this could be your looking for 1. Make a safe copy of the file C:Program FilesBMC SoftwareCONTROL-M EM 6.2.01etcdomainsconfig.xml file on the GUI View the full article

18 juin 2009 : Control-X Re: Ctm 6.2 EM Client - Server connecting to the wrong client IP

Hi Stein, Try "orbconfigure.vbs" from a command prompt. You may have to put in the fully qualified path. /default/bin/ I hope this helps. ~~Pat From: View the full article

18 juin 2009 : Control-X Ctm 6.2 EM Client - Server connecting to the wrong client IP

Hi Control-M version 6.2. Server components on Solaris Unix. On my desktop computer running Windows I have several IP-adresses. When I connect to the View the full article

18 juin 2009 : Control-X Re: ctmudly and recovery

My recovery is only "in case of" ... we are not expecting any errors, but in case of problem (user-daily that was killed or was stopped was any reason), we View the full article

17 juin 2009 : Control-X Re: Question

Thanks anyone else? Tim Marshall Technical Specialist - IT Production Control Rogers Shared Services 8200 Dixie Road Brampton, Ontario L6T 0C1 Office: (647) View the full article

17 juin 2009 : Control-X Re: Question

Tim, I remember this option directly available in autosys , exclude_calander option. In control-M as I always did created two calendars dates are mutually View the full article

17 juin 2009 : Control-X Question

Anyone know if this is possible I need to be able to setup 2 jobs. One to run on a calendar (created by me), and the other one to run every day except the View the full article

17 juin 2009 : Control-X Re: Time Synonym - what is it for?

So I have switched off the Time Synonym option (all my timestamps went "werewolf" - i.e. they started to look very strange if they were after midnight ...). My View the full article

17 juin 2009 : Control-X Re: ctmudly and recovery

Yes, the perl script will error (RC=1) if it doesn't match all requirements (and it will say which one was the error). The ctmudchk cmd one only generates View the full article

16 juin 2009 : Control-X Re: Pulling files by Sequece number

Got it to work! Thanks much. ... From: j_venu1998 Subject: [Control-X] Re: Pulling files by Sequece number To: View the full article

16 juin 2009 : Control-X Re: Pulling files by Sequece number

This is inbuilt auto varaible , you can use it directly. Or you can do as below define this in %SET tab of the job %SEQ = 0%%RUNCOUNT. use %%SEQ as you View the full article

16 juin 2009 : Control-X Re: Monitor for multiple files in FileWatcher

Dan, You are fine using /*.txt and the FileWatcher form. There should be an option also to set the "check filesize on Wildcard". I would highly View the full article

16 juin 2009 : Control-X Re: Pulling files by Sequece number

How do i define that in the form? ... From: j_venu1998 Subject: [Control-X] Re: Pulling files by Sequece number To: View the full article

16 juin 2009 : Control-X Re: Monitor for multiple files in FileWatcher

you no need to use -input you can use as below ctmfw "Directory*.txt" CREATE 1 60 10 3 480 N Note: set the parameters accordingly Regards Venu View the full article

16 juin 2009 : Control-X Re: Start Weblogic using Control-M

Hi Daniel, Thanks for the information. A little update: I have successfully started the weblogic, although without the console. Apparently since the script View the full article

15 juin 2009 : Box OFF_HOLD behaviour

Had a situation on Friday where I put a level 2 box job ON_HOLD. The box was then taken OFF_HOLD but the command jobs within went to "AC" but did not start. The box itself went into RU, but the child jobs did not. There are no conditions set for the command jobs within. In the end we did a (...)

13 juin 2009 : Control-X what is the definition of 'seat'?

Hi, I was reviewing our license and I noticed that we're allowed 'x' number of "ECS seats" - do they mean every PC where Enterprise Manager is installed or the View the full article

12 juin 2009 : Control-X Re: AT log on the Control-M agent is growing big

I see also by stopping/starting the AT process in agent works well. From: Control-X@yahoogroups.com [mailto:Control-X@yahoogroups.com] On Behalf Of george2ctm View the full article

12 juin 2009 : Control-X Re: AT log on the Control-M agent is growing big

Just move the file away and AT process will create a new file. View the full article

12 juin 2009 : Control-X Re: Running Oracle "Live Active Partition"

Don't do that. Control-M keeps track of vendor of DB server for many DB operations. I would not consider switching DB vendor without reinstall. In addition, View the full article

12 juin 2009 : Control-X Running Oracle "Live Active Partition"

Folks, Is anyone running Oracle "Live Active Partition" on a AIX box 5.3 or 6.1.??? I'm currently running Control-M version 6.03 on a Windows box using MSSQL View the full article

12 juin 2009 : Control-X Re: Cost Model (Total Cost of Ownership)

Here are the parameters that I'm using for Cost Model for defined jobs: -BMC Software Maintenance Cost -Labor costs (Control-M Administrators maintaining the View the full article

12 juin 2009 : Control-X John N DEWSNAP/HBEU/HSBC is on holiday

I will be out of the office starting 12/06/2009 and will not return until 15/06/2009. Alternative contact is Simon Kusners 790 31704 or Rick Fawley 790 29986 View the full article

12 juin 2009 : Control-X Re: Export/Print the tasks of the active environment

You can query the DB if that is an option. There is a table cmr_ajf in the server DB schema. This will give you whole lot of information. Or you can use ctmpsm View the full article

12 juin 2009 : Control-X Export/Print the tasks of the active environment

Hello group, I am looking to export the tasks of my active environment in order to print them. ? I want to create something like a reference poster for the View the full article

11 juin 2009 : e_uajm_make_jil

File Name: e_uajm_make_jil File Submitter: Adrian Risidore File Submitted: 11 Jun 2009 File Updated: 11 Jun 2009 File Category: Extra Technology Resources Compatible Product:: CA AutoSys Compatible Product Version: 4.x, r11.x Current Resource Version: 1.3 Resource Type: Shell Script (...)

9 juin 2009 : CONTROL-M User Communities

If you've stumbled in here and are wondering where all of the CONTROL-M users are hiding , this is where they have been hanging out mostly: CONTROL-X Yahoo group http://tech.groups.yahoo.com/group/Control-X/ Probably the biggest and most active internet CONTROL-M usergroup. Primarily used as (...)

27 mai 2009 : CA 7th Annual Development Exchange Summit

Preliminary dates for CA's UK 7th Annual Development Exchange Summit is during the week of October 26th 2009.

23 mai 2009 : Tidal Software acquistion by Cisco now complete.

Just for info.... On 20 May 2009 Cisco released a press release (http://newsroom.cisco.com/dlls/2009/corp_052009.html) announcing that it has completed the purchase of Tidal Software. # # # Cisco Completes Acquisition of Tidal Software SAN JOSE, Calif. - May 20, 2009 - Cisco today announced (...)

18 mai 2009 : Terminating Jobs Of Nested Boxes

Hi: I have an AutoSys box job that contains some regular jobs and other boxes, each of which contains regular (non)box jobs. It looks like this... OUTSIDE_BOX - OUTSIDE_JOB1 - OUTSIDE_JOB2 - INSIDE_BOX1 - INSIDE_BOX1_JOB1 - INSIDE_BOX1_JOB2 - INSIDE_BOX2 - (...)

14 mai 2009 : How well do you know your AutoSys environment?

Ok, so your an AutoSys administrator but do you know how AutoSys is being used or abused by your application teams?

4 mai 2009 : Cybermation Heritage? Java Credentials? Web Services?

Given the similar roots (i.e. some common personnel) between both products, does the OpsWise product tackle the task of scheduling in a similar way to Cybermation? How does the OpsWise product deal with the Java side of things? Can jobs be defined using Java script? Does it plug into Web (...)

29 avril 2009 : Jobs, as in employment

Is posting jobs, or posting that you're seeking a job, acceptable somewhere on this site? Don't want to step on any toes... Thanks! Jen Barber

6 avril 2009 : CA WATS

Can anybody confirm the date and location of this year's CA WATS event? Details of the 2008 event are listed here - http://www.ca.com/us/content/campaign.aspx?cid=156395 Thanks

31 mars 2009 : Sunflower Challenge

Hi all, Off topic but thats what this section is all about www.children4children.me.uk Children4Children are a fundraising organisation raising money for the Southend Sunflower Trust. Their aim is to educate kids about children of less fortunate walks of life. Arranging curriculam and (...)

16 mars 2009 : WCC & CA7

Hi forum, I have a question regarding the CPU usage on CA7 when coupled with WCC. We have an environment where by WCC is installed on a Windows 2003 server SP2. It connects to the mainframe via CCI. This all works. However, when we create a job flow of only 6-8 jobs, the CPU on the mainframe (...)

6 mars 2009 : e_uajm_control

File Name: e_uajm_control File Submitter: Adrian Risidore File Submitted: 6 Mar 2009 File Category: Extra Technology Resources Compatible Product:: CA AutoSys Compatible Product Version: r11 Current Resource Version: 2.5 Resource Type: PERL Script (pl) Extra Technology Limited is pleased to (...)

6 mars 2009 : e_uajm_mon

File Name: e_uajm_mon File Submitter: Adrian Risidore File Submitted: 6 Mar 2009 File Category: Extra Technology Resources Compatible Product:: CA AutoSys Compatible Product Version: r11 Current Resource Version: 1.4 Resource Type: PERL Script (pl) Extra Technology Limited is pleased to (...)

3 mars 2009 : AutoSys Metrics

On the subject of More Meaningless Metrics, how about using a daily job-to-jobrun ratio. This would basically be the number of job runs in a day/period, divided by the number of defined active jobs (e.g. not ON_HOLD or ON_ICE). So if you measured 50,000 job runs in a day but had only 1,000 (...)

17 février 2009 : Information regarding Autosys r11

Hi, Can anyone please let me know the following information regarding Autosys r11: 1. Hardware and Software requirements for installing Autosys r11 in Windows environment. 2. Price and licensing information for autosys r11 in Windows environment. Thanks in advance, (...)

17 février 2009 : Requirements for Tidal Enterprise Scheduler

Hi, Can anyone provide me with the following information: 1. Hardware and Software requirements for installing Tidal Enterprise Scheduler in Windows environment 2. Price and Licensing information for Tidal Enterprise Scheduler in Windows environment. Thanks in advance, (...)

17 février 2009 : Price of Tivoli Workload Scheduler

Hi, Can anyone provide me with the following information: 1. Hardware and Software requirements for installing Tivoli Workload Scheduler in Windows environment 2. Price and Licensing information for Tivoli Workload Scheduler in Windows environment. Thanks in advance, (...)

17 février 2009 : Can Autosys r11 be used for scheduling Microsoft .NET executable file?

Hi, I am new to autosys and was just thinking about whether scheduling of Microsoft .NET executable file is possible through autosys. I will be of great help if someone could provide me with some information about any link where I will get types of files supported by autosys. Also, if .Net (...)

11 février 2009 : Escalation of AutoSys ALARMS

I'm curious to know how folks escalate their AutoSys ALARMS, if at all. The choices seem to be: 1. SNMP 2. Forward to Unicenter (and perhaps onwards from there) 3. Something else. I am interested in number 3 above, different and creative methods for capturing and distributing AutoSys (...)

7 février 2009 : e_uam_control

File Name: e_uam_control File Submitter: Adrian Risidore File Submitted: 7 Feb 2009 File Updated: 7 Feb 2009 File Category: Extra Technology Resources Compatible Product:: CA AutoSys Compatible Product Version: r11 Current Resource Version: 2.5 Resource Type: PERL Script (pl) Extra Technology (...)

7 février 2009 : e_uajm_mon

File Name: e_uajm_mon File Submitter: Adrian Risidore File Submitted: 7 Feb 2009 File Updated: 7 Feb 2009 File Category: Extra Technology Resources Compatible Product:: CA AutoSys Compatible Product Version: r11 Current Resource Version: 1.4 Resource Type: PERL Script (pl) Extra Technology (...)

23 janvier 2009 : Duplicate Events... HELP!!!

Firstly great redesign, I like the new look and will be downloading the utilities for my r11 testing Now the problem(s)....... Has anyone had any experience with duplicate events on Oracle? I have read the CA doc on removal but the dam things keep coming back and causing me no end of (...)

21 janvier 2009 : Anyone using r11.1 yet

Has anyone deployed r11.1 yet? We are still on r5.0.3.0 build 251 and thinking of upgrading to r11.1.

18 janvier 2009 : e_uajm_mon

File Name: e_uajm_mon File Submitter: Adrian Risidore File Submitted: 18 Jan 2009 File Updated: 29 Jan 2009 File Category: Extra Technology Resources Compatible Product:: CA AutoSys Compatible Product Version: r11 Current Resource Version: 1.4 Resource Type: PERL Script (pl) Resource (...)

18 janvier 2009 : e_uajm_control

File Name: e_uajm_control File Submitter: Adrian Risidore File Submitted: 18 Jan 2009 File Updated: 21 Jan 2009 File Category: Extra Technology Resources Compatible Product:: CA AutoSys Compatible Product Version: r11 Current Resource Version: 2.5 Resource Type: PERL Script (pl) Resource (...)

7 janvier 2009 : e_uajm_mon

File Name: e_uajm_mon File Submitter: Adrian Risidore File Submitted: 7 Jan 2009 File Updated: 8 Jan 2009 File Category: Extra Technology Resources Compatible Product:: CA AutoSys Compatible Product Version: r11 Current Resource Version: 1.4 Resource Type: PERL Script (pl) e_uajm_mon.pl is an (...)

4 janvier 2009 : e_uajm_mon.pl

File Name: e_uajm_mon.pl File Submitter: Adrian Risidore File Submitted: 4 Jan 2009 File Category: Extra Technology Resources Product Compatibility: CA AutoSys Product Version: r11 Resource Version: 1.4 This resource is an AutoSys® r11 monitoring tool. It has been written to run on servers (...)

4 janvier 2009 : e_uajm_mon.pl

File Name: e_uajm_mon.pl File Submitter: Timmy File Submitted: 4 Jan 2009 File Category: Extra Technology Resources Application: AutoSys® Application Version: r11 Resource Name: e_uajm_mon.pl Resource Description: e_uajm_mon.pl is an AutoSys® r11 monitoring tool. The status of each key (...)

30 décembre 2008 : Extra Technology Resources

Free resources provided by Extra Technology Ltd. The resources provided are for varying toolsets. Versions and are continuously updated with additional resources added frequently. To download these resources please view the "Downloads" tab at the top of the page, alternatively they can be (...)

30 décembre 2008 : e_make_jil

_formerly make_jil _generates JIL code for multiple environments (e.g. dev, test and prod) from common source code _designed for AutoSys® 4.x or r11.x

30 décembre 2008 : e_uajm_mon

_monitors the health of key AutoSys modules in realtime. _designed for AutoSys® r11.x